Chucks for KW spin coaters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These designs are a series of chucks for KW spin coaters.Three of them are adapted for silicon fragments of different…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
These designs are a series of chucks for KW spin coaters. Three of them are adapted for silicon fragments of different sizes. They use O-rings of different sizes. The size is indicated in the file name with the first dimension being the outer diameter and the second dimension the ring thickness. O-rings are not strictly necessary for being air-tight, but mostly to increase the friction coefficient between the chuck and the sample. Two more designs are adapted for glass slides and include a recess to center and maintain the sample. In this case the O-ring is not strictly necessary (the recess is enough to hold the sample) and one design does not use one. I have tested all those designs printed in PLA tough with 3 walls and 25% infill up to the maximum speed of 10 000 rpm without issue.
Category: Tools