Mason jar soap pump adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn a Mason jar with a 65mm (2.6") lid into a soap dispenser with an upcycled pump
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 79
- Wydruki
- 1
- Wyświetlenia
- 474
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Please note the noncommercial license. You are not allowed to download this and sell it.
Turn a Mason jar into a soap dispenser. Replaces the original lid and is held in place by the screw band (ring).
Fits Mason jars with a 65mm diameter lid (appx 2.6") and a soap pump with a thread of 28mm OD and 4.2mm pitch. Reclaim the soap pump from some other thing (disposable soap dispenser, shampoo, etc) and check the male threads on the container to confirm.
Should print with no supports necessary. Suggested 0.2mm layer height for 0.4mm nozzle, but defaults should be fine. Material should be unimportant.