Voron Design SMRRF Name Badge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Print At Home customizable name-badge for SMRRF 2024 and 2026, complete with slot for a Maker Chip!
- Ocena
- 5 / 5
- Polubienia
- 98
- Pobrania
- 432
- Wydruki
- 28
- Wyświetlenia
- 1865
- Oceny
- 24
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- GNU General Public License v3.0
This is a modular name badge created by @kyle_gb, @alexandertmoss, and @hartk on the Voron Design Discord! It is designed to be modular, and allow you to customize it, as well as has a slot for a maker chip to be shown off.
There are two different versions of the Name Plate. The MMU one is designed to be printed on multimaterial capable printers, while the Layer Swap version is intended to be printed with you manually swapping filament at a certain layer to handle the color change.
The name plates are retained in the badge with short sections of 1.75mm filament.
-----
These are the recommended print settings:
Material: Doesn't matter
Layer height: 0.2mm
Extrusion width: 0.4mm
Infill percentage: Doesn't matter
Infill type: grid, gyroid, honeycomb, triangle, or cubic
Wall count: 4
Solid top/bottom layers: 5
-----