DIN Rail Housing for 8-Channel Relay and OLED Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIN rail housing for 8-channel relay, OLED display, and custom PCB, with secure mounting and flexible DIY use.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 492
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This DIN Rail Housing for 8-Channel Relay Modules is a versatile enclosure designed for organizing and protecting custom electronics. It fits an 8-channel relay module, a 60 mm x 40 mm PCB board, and a 0.96-inch OLED display, making it suitable for a wide range of DIY automation projects.
The housing consists of three components: the main enclosure, a lid for protection, and a spring mechanism for secure mounting to a DIN rail. I have personally used this for managing a Gardena sprinkler system, controlling 6x 24 VAC valves and a water pump via a contactor. In this setup, I included a custom PCB with an ESP32-C3 microcontroller and components to rectify 5-24 VAC to 5 VDC, integrated with Home Assistant through ESPHome. While this is one example, the design is flexible enough to support many other low-voltage control and automation projects.
To simplify custom modifications, such as adding holes or text, I have also uploaded the housing design in STEP format, allowing you to tailor it to your specific needs. If you create your own version of this design, please share your make and describe your changes and how you used it in your project.
Key Features:
- Compatible with
- 8-channel relay module (Amazon affiliate link)
- Small 60 x 40 mm PCB (Amazon affiliate link)
- 0.96 inch OLED display (Amazon affiliate link)
- 3-pin terminal (Amazon affiliate link)
- Secure DIN rail mounting with a spring-loaded mechanism.
- Adaptable for various DIY automation and control applications.
Important Note:
Common filaments like PLA, ABS, ASA and standard PETG are not rated for electrical applications and are not self-extinguishing. PETG is recommended for its lower flammability, but for 110V/240V systems, consider using a UL-certified filament such as Prusament PETG V0 for added safety.
This housing offers a practical and customizable solution for integrating relay modules and custom electronics into DIN rail setups, suitable for a range of DIY applications.