New External Hygrometer housing for PRUSA MK3S with integrated SD Card holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screwable external housing for a hygrometer modul with a storage area for tools and 3 SD Cards
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 348
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This external housing (new version) has space for a small standard humity / thermometer modul. You can fix it with only one 3 mm screw on a existing hole in the i3mk3s metal frame without disturbing (I hope) other moving parts. The housing has also a store compartment for tools, a holder for 3 SD Cards and some allen keys or other useful things.
The Modul is ventilated over some air holes.
I have printed it with some support material (please have a look at the pictures) and with 0.2 layer high and the result was good.
The dimensions for the Modul opening are: 25 mm height and 45 mm length.
When you want you can use the upper part as a “Stand Alone” (have look at the picture), a place for the modul, SD Cards and tools.
For the design I have used Fusion 360 and the Prusa slicer.