Washer for Elite Suito thru-axle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No more adjusting the derailleur when putting the bike on the indoor trainer
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Public Domain
Simple washer to add some additional spacing for the thru-axle adapter on my Elite Suito direct drive bike trainer.
The gap on my rear wheel between the edge of the thru-axle mount and top edge of the cassette is 6mm while the cassette on the trainer had a gap of 5mm. That 1mm caused a lot of noise and skipping gears without some adjustment when swapping between riding outside and inside. Adding this spacer on the trainer extended the gap to 6mm. Measurement instructions here: https://forums.zwift.com/t/guide-to-direct-drive-trainer-cassette-spacing/601840
Fits before the provided 12x142 thru axle adapter (see picture)
This washer is 1mm and your spacing may be different. Just resize in your slicer in the Z-direction only.