Washer for Elite Suito thru-axle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
No more adjusting the derailleur when putting the bike on the indoor trainer
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 0
- Views
- 338
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Public Domain
Simple washer to add some additional spacing for the thru-axle adapter on my Elite Suito direct drive bike trainer.
The gap on my rear wheel between the edge of the thru-axle mount and top edge of the cassette is 6mm while the cassette on the trainer had a gap of 5mm. That 1mm caused a lot of noise and skipping gears without some adjustment when swapping between riding outside and inside. Adding this spacer on the trainer extended the gap to 6mm. Measurement instructions here: https://forums.zwift.com/t/guide-to-direct-drive-trainer-cassette-spacing/601840
Fits before the provided 12x142 thru axle adapter (see picture)
This washer is 1mm and your spacing may be different. Just resize in your slicer in the Z-direction only.