1 / 7
SK-Go Volcano Hemera Fan Duct + Pinda mount — zdjęcie 1
1 / 7

SK-Go Volcano Hemera Fan Duct + Pinda mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This fan duct can be used with the mounts created by Paul for SKGo. They are located…

Ocena
0 / 5
Polubienia
3
Pobrania
20
Wydruki
0
Wyświetlenia
396
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This fan duct can be used with the mounts created by Paul for SKGo.

They are located here
https://github.com/TheBasicMind/3DPrintParts/tree/master/Hermera%20Mount
Note: These mounts were designed for 3mm aluminum, but I had to cut them using 1/8" (3.175mm) so the fan mount is design for 3.175mm

Make sure to look at the photos for the way mounts are installed as the duct will only fit one specific mount configuration.

You can also mount a Pinda to the left of the nozzle (offsets are X:-25, Y:0)

Category: 3D Printer Parts

Tagi