1 / 7
SK-Go Volcano Hemera Fan Duct + Pinda mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This fan duct can be used with the mounts created by Paul for SKGo. They are located…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 398
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This fan duct can be used with the mounts created by Paul for SKGo.
They are located here
https://github.com/TheBasicMind/3DPrintParts/tree/master/Hermera%20Mount
Note: These mounts were designed for 3mm aluminum, but I had to cut them using 1/8" (3.175mm) so the fan mount is design for 3.175mm
Make sure to look at the photos for the way mounts are installed as the duct will only fit one specific mount configuration.
You can also mount a Pinda to the left of the nozzle (offsets are X:-25, Y:0)
Category: 3D Printer Parts