P2 Pro Thermal Camera mount for Quad Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the P2 Pro thermal camera from Thermal Master. Attaches to a Quad Lock phone case connector.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A mounting attachment for the P2 Pro thermal imaging camera that fits to a Quad Lock connector.
I didn't like the small form factor and location of the P2 Pro camera.
My hand would keep blocking the image, it felt very fragile and exposed to damage from drops or knocks and it's small size meant it could easily get lost.
This mount attaches to my phones Quad Lock case mount, putting the camera in a more practical position.
Printed on my Prusa Mk3 in PLA.
Print with Quad Lock face down, and supports required.
The retention clip for the thermal camera will break if over bent in PLA. However I've found the camera is well retained by the USB cable, and so haven't felt the need for the clip. Otherwise, print in PETG for a more durable clip.
The mount has a pocket for a ¼-20 UNC nut, that may be glued in to attached the mount to a tripods screw.
The image can be rotated 180° in the options in the options of the Thermal Master app.