Raspberry Pi Pico 18-Key Macro Pad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry Pi Pico macropad. Customize your keybindings!
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 214
- Wydruki
- 2
- Wyświetlenia
- 2813
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This macropad is a great introduction into programming and soldering. Follow the guide on tomshardware.com/how-to/raspberry-pi-pico-powered-stream-deck to for example wiring and software.
Sample code has been provided - in the link above. Keycodes can be found here: circuitpython.readthedocs.io/projects/hid/en/latest/_modules/adafruit_hid/keycode.html
Parts List:
-18 cherry style mechanical key switches
-raspberry pi pico
-wires
-no glue or screws required! all parts friction fit together
Assembly:
-Print keycaps, frame, and switch plate
-snap all switches into the plate
-solder a common wire between one pin on each switch
-solder a wire between the 3v3 pin on the pico and the power bus on the key matrix
-solder the remaining pins of the switches to an individual gp pin on the pico (I've used gp0-17, but you can use any - just change it in the code)
-snap the pico onto the standoffs in the frame
-slide the switch plate into the frame