1 / 2
Telescope Finder Scope Mount w/Picatinny Rail — zdjęcie 1
1 / 2

Telescope Finder Scope Mount w/Picatinny Rail

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed to allow installation of a better scope

Ocena
0 / 5
Polubienia
4
Pobrania
40
Wydruki
1
Wyświetlenia
269
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Rev 2 is stronger - when the first design (R1) was mounted, the open ends splayed out as the fasteners got tightened. R2 also rotates the model 180°, and increases the layer height, resulting in a faster print.

 

Recommended Print Settings

  • Material: PLA
  • Layer Height: 0.2 mm or less
  • Infill % : 15% or more
  • Supports: None
  • Print Orientation: Default as modeled
  • Raft: Optional
  • Brim: Optional

Tagi