Icom Handset / Microphone Hanger for Woodscrews
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a hanger that wasn't crappy metal and easily bent, so I made my own, since no nice ones exist yet.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I have an Icom IC-2730A, which uses an HM-207 mic. I had already created a nicer hanger for my Yaesu mic, but this one has a molded-in “bar” in which you are supposed to hang it from. Being cheap and thin sheet metal, I'm not one to use something that can bend or possibly rust, so I created this hook.
I'm not sure what wood screws I used, but the holes are 4.5mm in diameter with a head diameter of almost 9mm. I used a model with a curved neck, so look for that.
- Remember to drill a hole first so you don't split the wood!
- Do NOT over-tighten, or you will split the sides of the mount, due to the orientation of printing. You can see this in my picture.
Print settings I used are PETG, 30mm/s, 25% fan at 5mm, and 40% infill, but I would probably bump it up to 90-95% infill to try and fight the splitting.