Liczymy pasujące modele…
I have both Yaesu and Icom radios in the shack and wanted a common mount fo the microphones. This adapter modifies the Icom microphone “clip” to the “button” style found on CB and Yaesu microphones. It fits in the mic ok, a small drop of…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Its just a replacement for a broken microphone mount. As it is, is easy to print in PLA or PETG. Suitable for FIFINE microphones . Additional hardware may be needed. In fact, you should keep the original threaded nut that can be extracted…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
I had to fix my microphone stand. I recycled the threaded insert for the rotating part and used an M8 nut for the vertical mounting part.
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
A strong adapter to mount the HyperX QuadCast microphone horizontally. It lets you use the original nut and thumbscrew to secure it horizontally on its stand. The model I based this off had the majority of the weight resting on a very…
I found the height of the QuadCast on the stand to get in the way of my monitors. This makes the overall height much lower, and allows for more clearance under the stand if you want to bring it forward under your keyboard. Uses all the…
I recreated the shock mount that I currently have. It should be good enough to print with supports. I will probably create a 3D printing friendly one that does not need supports. You will also need a elastic band to connect the two…
Monitor support for Hyperx Solocast, with that you can't have your mic plugged into your monitor and it will move with it no more repositioning the mic every time. No more arms for the microphone I did it because I hate standard…
[EN] Tabletop microphone stand This is a basic stand for a pair of microphones, so that they can be fixed to the table. The central pin was added after printing, to give it more strength. [PT] Suporte de mesa para microfone Esse é um…
Derived from Serentos's work, for older notchless versions of the Quadcast. This can be used with only the original hardware and accepts an additional screw & bolt for sturdier results. Printing Tips Print with high infill and thick…
be free of plastic monetization by your finnish overlords
A few years ago we switched capsules on our Shure QLXD4s and no longer had anti-roll ridges on our mics. After a few of them started rolling away from tables on stage, I made some holders to keep the mics still. They hold Shure wireless…
This is a Microphone Stand, designed to screw onto a 1/4”-20 UNC thread such as the one’s used on camera tripods. Thus allowing you to use a camera tripod as a microphone stand Add a pause (M600) command at the 5.8mm mark (layer 29 at…
This clamps onto the corner of a desk, and provides a place to hang a microphone, in my case specifically a GS56S. Assumes a 18mm thick desk, with 75mm rounded corners, but should be fairly easy to modify for a different set of…
Ever since I got myself a roll of Pink PLA my 4 year old sister wants me to print and design stuff for her. Recently she was wanting a microphone for her barbie doll so I designed something simple and printed it. She really liked it and…
Panasonic DMC ZS60/TZ80 has a very poor wind protection and when a wind appears, you cannot hear what people say in the video. I didn't want to glue foam directly on the camera so I made this removable adapter. The foam is glued inside…
An easy to print desktop tidy to stop mics rolling off the desk.
Microphone stand for pipe (diameter 28 mm) – Brüel & Kjær Array Microphone Type 4957. The height of the microphone is 5 cm above the bottom edge of the model.
I needed a microphone isolation shield to help control reverb and external noise when recording voice overs. None of the available solutions were large or flexible enough for my application. I also wanted a system that I could reconfigure…
This simple headphone hanger mounts securely to your microphone stand, saving desk space and keeping your workspace organized. Two screws ensure a firm attachment. For assembly, you'll need two M3x20 screws and two M3 nuts .
I use an amazon basics condenser mic on my desk (yeti clone), and I mount it on an arm so I had the original support mounting holes free to hook a filter onto it. The thing definitely works and I'm happy with it, the grill is just 2…
The model allows to mount a microphone at the hole of a Cajon. The holder has a mounting position for. Due to the long arms, there is a support ring, that stiffens the arms. I attached felt gliders at the claws (see pictures) to get a…
I created a variety of sizes of mic stand cable clips. Why pay over a dollar each from the store when you can print them for pennies a piece! Tips: Print all of the sizes at first, then test them out to determine which sizes fit your…
This is a simple adapter that helps to mount a led light to a microphone stand.
This is a 3D-printed clip to mount a Thomann Ovid system microphone onto an Irish wooden flute , designed as a replacement for the flute holder provided by Thomann. I designed it specifically for my Villoing Irish flute , but it should…
I received a microphone bracket from another Grenadier owner (Dan). The bracket did the job but interfered with a couple of the controls I use. I have developed a similar bracket but with pushing the mic location to the left to clear the…
Big Boss/Naked Snake's Throat Mic from Metal Gear Solid 3. Add some fabric to the front portion and tape some string to it to make it look like the in game object, but this is the extent of 3D printed material possible. Fits an 18" neck…
This is a custom 3D-printed handheld grip designed specifically for the Saramonic Blink 500 Pro B2 (or similar dual-transmitter wireless microphone systems) and its included deadcat windscreen . I created this to transform the compact…
Nothing too complicated here. It's a replacement mounting point for a car hands free microphone when the original mount is broken or missing, with the added bonus of a channel in the base for cable management and strain relief. Print it…
The microphone clips that come with radio transceivers are relatively large. I wanted something that was unobtrusive and would mount easily on the edge of a shelf as seen in the photo. This one fits the bill. Print vertically, no support…
Fill 20 per cent (depending on what you put there). It is better to print the stand and the circle on which the microphone stands separately to save plastic. I also recommend gluing the gasket so that it fits snugly against the table. The…
3D-printed shock mount designed for slim condenser microphones (AKG P170-type / “cigarette” microphones). Uses elastic suspension to reduce vibration and handling noise. Designed around a GoPro-style mount for flexible positioning. Made…
Desk stand for microphones. Takes a 6mm diameter screw to attach. In my case, i attached the Auna CM900.
My old microphone needed a new battery and for some reason I couldn't find one with the same shape. So I made this new box I'm quite proud of. The files doesn't have any text. Here is the font for the power simbol:…
This is a custom print-in-place case for the Fifine M6 wireless microphone kit. It’s based on the Small Print in Place Box , but the entire interior layout was redesigned to fit the M6 components neatly. Variants V1 — with USB-A - USB-C…
For the Dutch Carnival (also known as vastelaovend ) I designed this microphone maraca (in Dutch a sambabal). It was inspired by the one that a local radio network was giving out. I used mostly the default settings but for the microphone…
This model was custom-made for the standard microphone that comes with Pioneer car radios, so it fits into the available spaces on the dashboard. It's a relatively simple installation, requiring only the placement of supports on the…
Adjustable Microphone Holder Introduction This is a fully 3D-printable microphone stand with corresponding clamps for different microphones. If you need an additional clamp for a specific microphone model, feel free to let me know in the…
Spring-Loaded Phone Holder for Microphone Arm (1/4" Mount) A few weeks ago, I unexpectedly needed to record a top-down video for a project due in two days. I already had a microphone arm with a standard 1/4" mount , but I didn’t have a…
A detailed CB radio microphone–style 3D printable model inspired by classic handheld mics. This STL file is designed as a non-functional display replica, ideal for props, décor, dioramas, or retro communication setups. Featuring a…
This remix of the Stereo Couple Bar by InschiClack is shortened from an overall length of 276 millimeters to 181 millimeters. The shortened length fits my smaller (Ender 3) print bed. The original is shown in red, along with the shortened…
This is one of the first multi-part things that I've designed so honest feedback would be appreciated! This Mount requires the following Hardware: -1x M5x10 Screw -1x M5 Nut (abt. 4mm thick) -2x M3x6 Screws -2x M3 Nuts (abt. 2,5mm thick)…
Microphone Holder for a Beyerdynamic Space. Can be installed pretty much everywhere by pulling a velcro strip through the two slits at the back.
Boom arm pivot replacement for the same PYLE stand in my tripod junction model. The boom pivot assembly on the OEM stand is a light gauge stamped sheet metal part which cannot apply sufficient pressure on the mount, and thus slips and…
Simple shims to fit either the first section of the monopod or the grip section, allowing to mount the excellent low profile microphone arm design to the monopod.
Round hook on a skadis board for a microphone or headphones
Replacement support for the IKEA LÅNESPELARE microphone arm. Stronger than the original while maintaining the same dimensions.
The model is based on @Elias_344681 model I've changed to bottom mount part for microphone holder head, where the outr diameter is 22mm, the center hole has diameter 8mm and thickness 6mm. Model works with general silicone/rubber…
This is a simple microphone mount designed for dual independent VESA arms with locking tubes. I created it to keep the monitors aligned while preventing the microphone from cluttering the desk. I've uploaded the .STEP file because it's…
Adapter for the flexible and sturdy arm system to mount universal Led ring lights, Microphones or Microscope boom mounts
A quick panel to hold a 14mm microphone from a BlueMusic adaptor Printed in ABS: 0.15mm Layer Height 2 Walls/Perimeters 30% Gyroid Infill
Let me introduce this Mini Project. It‘s basically a case for a small active microphone booster Box. You need 8 XLR Screws to hold everything together Everything can be printed without any supports. We are using 10-15% infill more info…
Chassis Sleeve for an AKG DMS300 Microphone. (5094802-00) Sleeve has ring / indent on bottom that can be colored for mic identification. Print in your choice of materials - I printed it in ABS. Threads may require finer layer heights…
Disclaimer: I had never used SolidWorks until a week ago, this fits my use-case currently - if you need to make adjustments feel free to improve on the design and tag me. Description: This is a microphone holder adapter for the…
Welcome! The Fifne AM8PROT mic is a great budget option. I've been using mine for a while, and at the 70 USD price point with a boom arm, it's a really good budget option. But one thing was wrong with it: no shock mount. The mic is…
This is a clip for microphone SENNHEISER SKM 35 (XS WIRELESS) fixed on RODE boom pole. May be you need support for the hole. Walls x 4 for greater strength. Infill 20% gyroid type. Functional with PLA 2.0+.
A 13 mm Samson-style clamp mount to accept a 10 mm microphone arm by adding a custom adapter sleeve for a secure fit.
A remix of this cool pen case to hold a Bluetooth microphone and its accessories.
Microphone holder for the Yaesu MD-1 desk Mic. May also fit on other Yeasu microphone models.
This is a remix of @sla_studio 's Low Profile Microphone Arm I've reduced the length of both arm pieces (and respective covers) by ~30mm each in order for them to fit and be printable on smaller printers with 220mm x 220mm print plates -…
I wanted something different for my QRP radio. I used a primer filler then matte paint after printing for the finish. Used PETG at 0.16, 40%infill, 3 walls. I included a blank microphone grid, to create the other one I used modifiers in…
ENGLISH Microphone box and cable box for the auna Streetstar 12 and 15 portable PA systems; the boxes are inserted into the side recessed handles of the system and held in place by the screw-mounted handles. To remove the two handles…
U-bracket to attach the ZealSound K66 microphone to any standard boom mic arm using the 3/8 inch bolt/adapter. This bracket has a recess for a 3/8 inch nut (15mm x 8.5mm), and uses the original holder screws for the microphone. ASA/ABS…
Remix of the Samsung Galaxy S20 Cover. This cover is for the standard S20 (151,7 x 69,1 x 7,9 mm), not the plus size version. Print it with PETG because it is more flexible than PLA and makes it easier to mount the cover on the smartphone…
My first attempt at a small-scale shock mount for 20mm pencil condenser microphones. I wanted to make this as small as possible for my Sennheiser e614 mics. The design uses rubber hair elastics to float the mic and the bases tie together…
MH-8800G/5 DYNAMIC UHF Microphones holder - Provide wall storage for 2 hand held microphones type MH-8800G/5 DYNAMIC UHF Microphones
Ever since I got myself a roll of Pink PLA my 4 year old sister wants me to print and design stuff for her. Recently she was wanting a microphone for her barbie doll so I designed something simple and printed it. She really liked it and…
Drum Microphone Clip for Snare or Tom Mic This is a 3D printed version of a pretty common clip design to attach a mic to a snare or tom. Uses a screw mount (not included) to mount the mic and has a clip to hold the cable. Printing:…
I needed somewhere to put my harmonica microphone when I'm not playing, so I cadded up this model. It's a short and easy print. Print it on the front facing side on the build plate and a little bit of tree support under the flange. I used…
Panasonic DMC ZS60/TZ80 has a very poor wind protection and when a wind appears, you cannot hear what people say in the video. I didn't want to glue foam directly on the camera so I made this removable adapter. The foam is glued inside…
Support for 21mm microphone capsule. A friend gave me a condenser microphone because it sounded bad. He thought that the problem was the audio jack, but no, the problem was the microphone capsule, which had caught moisture. When I went to…
So I'm telling on myself a bit here, but yea, I acquired a Lovesense solace and I wasn't thrilled with the desk mount they had included. It doesn't have a lot of range. I did have a microphone arm and well I started designing. I found out…
This is just a tabletop microphone stand for the Philips Speechmike. If you are dictating reports with voice recognition using the Speechmike, and you are tired of holding the microphone with your hand… try this stand and free your hand…
Can be printed in one or 2 parts. Printed on 0.16mm layer on a X1C.
a simple, light and ergonomic microphone stand/holder that doesn't take much space or filament.
I once knocked over a microphone stand and the handle holding the microphone broke. I decided to make such a holder on a 3D printer, but so that it could also be mounted on a regular photographic tripod. In addition to the printed parts,…
Dieser H-förmige Abstandshalter wurde entwickelt, um die Stabilität zwischen den Streben eines Mikrofonarms zu gewährleisten – besonders dann, wenn eine Schraube gebrochen ist. Durch Anpassung der Größe kann zusätzlich der Winkel des Arms…
Summary Customizable (provided Autodesk fusion 360 file) mic arm holder. Default dimension (STL file) : pole diameter: 33 mm arm diameter: 12.5 mm holder high: 45 mm To attach the holder to screen pole, use: M5 20mm screw (x2) M5 nuts…
Anti-shock stand for Yeti microphone by Blue designs. A friend of mine complained that his mic registers vibration from his keyboard (located on the same desk), so I went on to make this to isolate the mic from the desk. I printed it on…
A friend of mine could not use the microphone integrated in his Renault Clio 4, so he removed the cover, and rotated the microphone downwards. After that mod the microphone was working fine, but needed some protection because it was…
There is a blog post with a lot more context about why this project came to be. This is my second time designing and publishing a desktop microphone stand . This time around for the Samson C02 condenser microphone. The microphone ships…
Someone reached out and asked me to make a series of things to use as visual aides for her class. This is the first make in a series going over how microphones work. Since the telephone is a transmitter, I figured I'd start with this up…
Contact Microphone Enclosure for Piezo contact microphone using 27mm piezo discs.
Magnetic box for the Maybesta lightning microphones. Since these microphones don't come with a box and having them in the original packaging is uncomfortable. Decided to make one. Print in place! Link to microphone: https://a.co/d/jag9trB
This is a simple clip to fix cables to a rod with 15 mm or 20 mm. The cable size can be upto 8 mm. Print instructions Printed in PETG with 3 perimeters. Remix welcome You'll find the FreeCad file attached.
Microphone case for L85 tripod body and T5.4 screw. A model for my physics thesis on Arduino as a school measuring system. Print Settings Resolution: 0.12 mm Infill: 25 % Category: Physics & Astronomy
This simple headphone hanger mounts securely to your microphone stand, saving desk space and keeping your workspace organized. Two screws ensure a firm attachment. For assembly, you'll need two M3x20 screws and two M3 nuts .
This is an adapter to mount the Andonstar ADSM302 microscope to a microphone stand/arm The hex opening is for a m10 nut. Most microphone arms will fit, I just replaced the imperial bolt to a metric m10 bolt on mine. Some disassembling and…
I needed a way to place a conference mic near the middle of a moderate sized meeting room so that it would pick up anyone who spoke. The bottom of the mic is flat — there's no provision for mounting it to a stand or fixture — so I removed…
This model is for the MB2 Stereo Mic Booster My dad had a lot of cables all over his desk and he wanted a simple way to get them out of the way. So I quickly designed this in sketchup to mount it under his desk. The screw holes are 6mm in…
Simple replacement for the cheap plastic clips that came with my Cacencan low profile microphone boom since they're apparently made from powdered sugar and disintegrated on me. I used my last original one to quickly draw one up and print…
For a friend that needed such a part. A former movie professional which was realizing video documentaries. A hairy socket comes over tje whole assembly (microphone and holder). Actual mount are round. and you have to use elastic strips to…
For a friend that needed such a part. A hairy socket come over it. Actual mount are round. and you have to use elastic strips to hang the microphone head in the middle. However no need to get it round. Here I made it hexagonal. I did this…
A simple enclosure for the Acusis S Linear Microphone Array https://antimatter.ai/acusis-s Mounting holes are designed for M3 screws. I can't remember the lengths. Printed on a MK3S.
