Wireless Microphone Holder - works with most brands
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stop rolling microphones in their tracks with a labeled microphone holder
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A few years ago we switched capsules on our Shure QLXD4s and no longer had anti-roll ridges on our mics. After a few of them started rolling away from tables on stage, I made some holders to keep the mics still. They hold Shure wireless mics but the 1.5" diameter holder works with most mics, wireless or wired.
For convenience, mic numbers are “stamped” in each holder to help with organization. A holder with a lowercase “h” is available as well for host mics.
As a bonus, the original design is here too; it holds three wired mics or two wireless Shure QLXD4s (I didn't include enough spacing between the mics).
Printed in PLA at 20% infill. No supports needed.