QRP Hand Held Microphone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted something different for my QRP radio, I used a primer filler then matte paint after printing for the finish.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted something different for my QRP radio.
I used a primer filler then matte paint after printing for the finish.
Used PETG at 0.16, 40%infill, 3 walls.
I included a blank microphone grid, to create the other one I used modifiers in the slicers and plaid with the infill type without top and bottom surface.
In regard to the wiring, refer to the Mini Microphone for QMX by Adam Kimmerley :
**Update:
2026-05-10
Added grid with modeled pattern as requested :''Hand held micro grid with modeled pattern.3mf'', not as the printed parts exactly but similar.
BOM:
Screw: M3 X 8 (4)
9.7 mm x 6.7mm Electret Condenser Mic Element (same one as the one suggested by Adam Kimmerley for his Mini Microphone for QMX)
3.5 mm TRS Panel Mount Jack (same one as the one suggested by Adam Kimmerley for his Mini Microphone for QMX)
Push Button: uxcell A12081400ux0336