Microphone holder for DT 990 Pro headphones (specifically the Behringer DT440 Mic)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A "sandwich" microphone holder for the DT 990 Pro headphones, specifically to hold the Behringer dt440 microphone.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Disclaimer:
I had never used SolidWorks until a week ago, this fits my use-case currently - if you need to make adjustments feel free to improve on the design and tag me.
Description:
This is a microphone holder adapter for the Beyerdynamics DT 990 Pro headphones, to hold the Behringer DT440 Cardiod Microphone (uses mini-xlr with a 3v phantom power - you need an adapter).

(This will also fit basically any microphone which has a wire with a 1.20mm diameter.)
Parts needed and assembly info:
x2 M3 Nuts of around 6.20mm max length (it will be an extremely tight fit, use pliers to force them in).
x2 M3 screws (any size because you'll need to trim down the length of the thread to around 4.30mm)

Extra Info:
The vertical wire holder is quite flimsy and falls off due to lack of material support, I can't be bothered to do more on this as it works fine for my needs but if you need it to be stiffer add a Rib support to it.
