Stand, mount and clamps for microphones
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand, adjustable mount and clamps for microphones. Everything printed, no additional parts are required.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Open Community License v1
Adjustable Microphone Holder
Introduction
This is a fully 3D-printable microphone stand with corresponding clamps for different microphones.
If you need an additional clamp for a specific microphone model, feel free to let me know in the comments.
Models
The mount.stl is the mount for the microphone and should be combined with a clamp and a stand. The file contains multiple objects, so do not forget to split it and rearrange the objects on your print bed.
The XXXX_clamp.stl files contain the clamp model for a specific microphone.
The stand.stl is the desk stand.
Optional: The mount is compatible with the following model. So if you want to mount your microphone to a drum, print this one as well: https://makerworld.com/en/models/1986301-drum-microphone-holder-with-screw#profileId-2141111
In that case you also want to print the drum_mic_holder_screw.stl
Printing Instructions
The parts are quite easy to print. No supports are needed if you orient them correctly on the print bed. I would recommend to use PETG or ASA for the threaded parts, with a 60 % infill (or more) for mechanical strength.
Mounting
After printing, mounting should be quite straight forward.
Make it your own
I included the STEP file. Feel free to modify the stand as you please.
If you have questions, remarks, suggestions, I would be happy to hear from you.