Stand, mount and clamps for microphones
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand, adjustable mount and clamps for microphones. Everything printed, no additional parts are required.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 214
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Open Community License v1
Adjustable Microphone Holder
Introduction
This is a fully 3D-printable microphone stand with corresponding clamps for different microphones.
If you need an additional clamp for a specific microphone model, feel free to let me know in the comments.
Models
The mount.stl is the mount for the microphone and should be combined with a clamp and a stand. The file contains multiple objects, so do not forget to split it and rearrange the objects on your print bed.
The XXXX_clamp.stl files contain the clamp model for a specific microphone.
The stand.stl is the desk stand.
Optional: The mount is compatible with the following model. So if you want to mount your microphone to a drum, print this one as well: https://makerworld.com/en/models/1986301-drum-microphone-holder-with-screw#profileId-2141111
In that case you also want to print the drum_mic_holder_screw.stl
Printing Instructions
The parts are quite easy to print. No supports are needed if you orient them correctly on the print bed. I would recommend to use PETG or ASA for the threaded parts, with a 60 % infill (or more) for mechanical strength.
Mounting
After printing, mounting should be quite straight forward.
Make it your own
I included the STEP file. Feel free to modify the stand as you please.
If you have questions, remarks, suggestions, I would be happy to hear from you.