Microphone Adaptor for Camera Tripod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Microphone clip, that screws to a 1/4”-20 UNC thread as used on camera tripods, letting you use one as a mic stand
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- GNU Lesser General Public License
This is a Microphone Stand, designed to screw onto a 1/4”-20 UNC thread such as the one’s used on camera tripods.
Thus allowing you to use a camera tripod as a microphone stand
Add a pause (M600) command at the 5.8mm mark (layer 29 at 0.2mm layer height) of the gcode to allow inserting a square nut.
Add neoprene foam to the microphone clip part for a snugger fit.
I designed this for a GS56S microphone, but it should fit many models.
Designed in Haskell using Waterfall-CAD, source code on GitHub, here, and on my website, here.