HyperX Quadcast Microphone Horizontal Adapter (Reinforced)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A strong adapter to mount the HyperX QuadCast microphone horizontally.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 332
- Wydruki
- 3
- Wyświetlenia
- 1500
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
A strong adapter to mount the HyperX QuadCast microphone horizontally. It lets you use the original nut and thumbscrew to secure it horizontally on its stand.
The model I based this off had the majority of the weight resting on a very flimsy piece which ended up breaking easily, so I redesigned a lot of it to make it much sturdier. Now the bottom and top are combined with the side arms, creating a far stronger structure. This also gives it a very snug friction fit (in my tests I could even hold it vertically without it slipping), but it has also an additional hole if you want to add another screw for extra security.
The original was also kinda ugly, with some odd braces protruding to the sides, so I simplified the braces, keeping them within the profile of the stand, but also making them thicker.
NOTE: I have only tested this on the original, older version of the Quadcast, but from seeing pictures I don't see anything that would prevent it from working on the new one.
Printing
- 3 perimeters with 0.4mm nozzle
- 15% infill
- Organic supports on build plate only
- I also used a small brim just to be on the safe side
Takes about 12g and 1 hr on a MK4 with 0.2mm layers