1 / 3
Connector block air supply inlet to organ flute pipe parametric customisable — zdjęcie 1
1 / 3

Connector block air supply inlet to organ flute pipe parametric customisable

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fully customisable block to take a straight tube and direct the air into an organ pipe. Or any similar use you can think

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
123
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution

I designed this to use in a 20-pipe Busker crank organ that I'm making, from a popular plan available on-line from its inventor. My version will be MIDI-only, so some aspects of the original design will be changed, including the route of the PVC air supply tubes.

My woodworking skills are probably not up to making accurate wooden blocks that will not leak, break, or otherwise spoil the organ. And I will need the inlet tube to reach the organ pipes at various angles. So 3D printing seems the best option for me.

The OpenSCAD code is fully parametric, and all dimensions can easily be changed.

This model will be airtight when the inlet is filled with  adhesive, and is bonded to the balsa wood pipe with PVA, epoxy adhesive, or silicone-based builders sealant.

The photos show my prototype block which is now successfully bonded to a test pipe. The .stl file that is attached will make this block - inlet hole 6.3mm, outlet 8mm, width 15mm. To make a different size block, just change the appropriate parameters in the OpenSCAD code.

Tagi