Top Cover Guider IIS

Check the model here: https://a360.co/44NW7pR

I added a Bambu file and the Guider files. 

In the STls folder you can find two options for the front part, it depends if you have a multicolor printer or you can print it with the name debossed. 

I used a PLA-CF (Lava gray) that matches the color of the Guider IIS: https://us.store.bambulab.com/products/pla-cf?variant=41145212108936

I added a PDF of the acrylic sheet (3 mm)

In both files (bambu and Guider), the lid handle has a pause so you can place the M3 nuts. 

BOM: 

8 x Socket Head Screw Black-Oxide, M3 x 0.5 mm Thread, 8 mm Long
10 - Steel Hex Nut Medium-Strength, Class 8, M3 x 0.5 mm Thread
2 x Hex Drive Flat Head Screw 90 Degree Countersink, M3 x 0.50 mm Thread, 10 mm Long
10 mm x 1 mm - Single Sided Adhesive Waterproof Weather Stripping Foam (optional) - Link : https://a.co/d/9gPoQpH
2 x Push to connect PTFE 1.75 mm - Link : https://a.co/d/eathWHL
10 x 10 mm x 2 mm Neodymium magnets (optional)

(You can apply a single side adhesive tape to stick the 3D parts to the printer if you want to)