Arcade Buttons (18/24/30mm) with Tiny Micro Switches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A while back I was asked to design some arcade parts around the use of these tiny micro switches (12.8x6.5mm)...
- Ocena
- 4 / 5
- Polubienia
- 29
- Pobrania
- 106
- Wydruki
- 2
- Wyświetlenia
- 798
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
A while back I was asked to design some arcade parts around the use of these tiny micro switches (12.8x6.5mm) which are typically found in mouse buttons.
So behold! My first release is the three arcade push button sizes I use the most (18, 24 & 30mm).
I believe they will be handy where mounting depth is limited. They have quite a different feel to more standard push buttons because their travel distance is so short, but that also makes them very instant.
Print all the parts upside down (as they are provided) and maybe consider a brim, especially if you are printing multiple parts at once.
Make sure the micro switch is oriented so the tiny push button is in the centre of the casing.
I foresee a fairly thin leverless fighting board being released in the near future...
--PATREON & PATREON SHOP.
--https://www.patreon.com/3DFreeman
Thanks for your continued support!
Aliexpress link to micro switches : https://www.aliexpress.com/item/1005005596552328.html