Liczymy pasujące modele…
Arcade For Switch Mk1 and Oled With Buttons Board /!\ The plate 4 is for the non Oled version /!\ Print on place , 15% infill , no supports required. Add with Board Buttons Please clean your Bed thoroughly and check that it fits properly.…
I have a drawer on my arcade and I was looking for a solution to add a button
Print in PLA 30 % infill For smooother top surface can use ironing
No supports and No glue - post fits snug in base. Disclaimer: Fish not guaranteed to understand the game... but you can patiently watch for the thrilling moment they might score some points! :) A few different options available: Ring…
Heres a Galagino arcade cabinet I created using a Cheap Yellow Display. Build information, links, gerbers etc: https://www.hackster.io/dynamight/cyd-galagino-arcade-cabinet-369ce9
My family was given a well used Pandora Box arcade system, but it was missing the joysticks. Not wanting to order a new joystick unit, I snagged a pair of 6mm hex bolts from the hardware store, 60mm long and drew up this simple setup in…
🎮 MakeCode Arcade RP2040 Game Console Project If you’re dreaming of building your own retro-style handheld console without burning a hole in your wallet— congrats , you've stumbled upon the right micro-powered rabbit hole. This little…
The smaller USB Zero Delay Encoder variant.
Updates 2026-03-29 added a 20.5mm version. This version also has a slightly thinner outer ring (1.0mm vs 1.2mm) 2024-03-17 Added different options for leg thickness. Also realized that most problems with legs fitting are solved with…
link to the switch itself: https://www.amazon.com.be/-/nl/dp/B01N549IDL?ref=ppx_yo2ov_dt_b_fed_asin_title Printed with 0,2mm layers and 0,4mm nozzle.
This model is for building a fully functional arcade machine powered by a Raspberry Pi. The build is meant to house a 7inch display and includes mounting holes for a joystick and 8 buttons. While there are tons of cheap handhelds out…
This is my door bell using this very Kailh Choc Arcade Button. Model for the door bell coming soon! Inspired by isycat's model , I set out to create one for the Kailh Choc (v1) keyswitch because it allows for a more low-profile button. At…
A quick restrictor gate I cooked up for my Zippyy stick for Street Fighter V. It's a pretty quick print and mounts using the original screws and holes. Not the shortest throw, but to me it feels much better than the square gate it comes…
This file is a replacement for the Quest VR controller cradle on the X-Arcade Tankstick-VR/Arcade2TV-XR controller. I purchased straps for my controllers and the loop it adds to the bottom prevents the controllers from fitting fully into…
Figurine 3D d’un gorille iconique au style arcade rétro. Modèle détaillé, posture puissante, idéal pour impression 3D et collection. Fichiers STL et 3MF inclus, prêts à imprimer.
If you aren't using a Quest with your X-Arcade Arcade2TV-XR or you added the haptics and want a nice flat shelf, print a couple of these and get a nice flat surface. Note that putting it low like I show in my photo will interfere with the…
This figit-toy is my first attempt at any kind of print in place mechanism, I really like how it moves and makes for a very fun toy. It is nice and small so will not need very much filament to print, could be a great gift if you just need…
Here are some shelf brackets for the X-Arcade Arcade2TV-XR pedestal. The brackets for the top shelf replace the rubber covers and are specifically for anyone who upgraded to the Haptics kit and has an extra top from that. The side…
Welcome to CHAMv3 Split Edition! I am extremely humbled by the amount of people who have downloaded CHAMv3 and posted their makes! I owe any success to you all, and I hope the CHAMELEON project makes custom arcade sticks more accessible…
Flydigi Apex 4 Controller Stand (No Supports, Optimized for 3D Printing) This is a custom-designed stand made specifically for the Flydigi Apex 4 controller. The geometry was carefully measured and modeled to ensure a precise and stable…
This is an arcade-style button that works with a limit switch. The button is fully functional as is, but I added some holes in case you'd like to add lights inside. I recommend gluing it with super glue, since with the type of printer I…
In order to get sound from a Frogger arcade board you need a 200 ohm variable resistor connected to the board. usually in a cabinet this is wired to the front in the coin box. if you're like me and have a board that was removed from a…
The touch panel on the X-Arcade Tankstick-VR/Arcade2TV-XR is really easy to hit by accident. You can reach for something past it (like the controls of the haptics kit) and press buttons just by brushing your arm against it. If you use it…
Quick and dirty model used in order to facilitate the modeling of custom model using this button.
The thin red piece in the picture goes behind the arcade machine as a door, it should slide right in. the arrow is meant to face outwards USE .STEP FILE FOR SLICING OR .STL FILE FOR BAMBU STUDIO
I got the haptics kit for the X-Arcade Arcade2TV-XR/Tankstick-VR and thought the replaced top woud make a great shelf, and I was right! Then I added a monitor arm and a rotatable monitor and my top shelf is no longer top shelf. Well, time…
This is a handle for a school project where you make a hydraulic marble maze. I made a handle for it but it looks like it can be used for anything so do as you please and use it or modify it to whatever you need it to fit
Bring the arcade to your desk! This 3-in-1 Ultimate Tabletop Arcade is a fully mechanical, 3D-printable gaming system designed for maximum fun with zero electronics. Whether you want to test your luck with Plinko, your precision with…
Though it's a good solution I am not a fan of the modular plugs, so here are some premade options for the side button panels.
Arcade fight stick keycaps for 24mm buttons. Designed with symbols
Update 21/02/26: Apologies this one slipped through the net. This should of been an STL version waaay before now. in anycase there is now all 14 of the joysticktop set 2 variations that were previously locked behind my Patreon. ... Here…
Update 21/02/26: Apologies this one slipped through the net. This should of been an STL version waaay before now. in anycase there is now all 12 of the joysticktop variations that were previously locked behind my Patreon. ... Here are…
Print all three parts. You might have to scale the nut by 1-2% / tweak print settings in order to get a good fit. I've been printing with 0.15mm layer height, but others will probably work.
This is a 3D printed case for Stress Pocket Arcade Fight Pad. Stress is compatible with GP2040-CE, and the Stress Fight Pad project by GroooveBob can be found at https://github.com/GroooveBob/Stress. Recommended hardware heat-set threaded…
# 3D Printable Open Stick Modular - Mini (OSM-Mini) --- ## Attribution The following text must be included in any distribution of derivatives of this board. All links must also be included. Copyright 2024…
I made a replacement top for a Sanwa button as part of a fight stick project.
Everything you need to 3D print your Arcade joystick... Except for one thing - 4x Micro switches (~28x16mm) per joystick. Obviously, the higher the infill and stronger the material you use will help with their durability, I print with PLA…
This is a project I've been meaning to do for a while, ordered all the bits and I had intended to use the guide/instructions on https://www.hackster.io/john-bradnam/galagino-esp32-arcade-355dde however I didnt wanna use the PCB's due to…
I'm a 2000s guy but when I think of the 90s the first thing that comes to mind are the stories my relatives told me about when they played with arcade cabinets. I decided to make this miniature cabinet model, adapting it to a slightly…
It is a simple arcade winner trophy designed by my son. it requires supports
I bought a Taito arcade cabinet to restore. While looking for parts I kept seeing pictures of the original machines with a “Taito” logo on the coin door. Sadly mine had been removed before I got the machine. I whipped up a quick version…
I was looking for a simple replacement for my 4 cabinet arcade machine that had the basic red oblong handles. This topper is a sphere 44mm in diameter. They have a threaded hole modeled into it, but I still ran a tap down it to give it a…
In the folder “Dual color 3mf files”, there are 3MF files saved with dual-color print settings The model of the yellow inscription is slightly smaller to fit in case of inaccurate printing. I couldn't fine-tune the correct hole diameter,…
A bat top with a 24mm Swerry button on top, created for the Prize Winner project. Use with a hollow lever shaft. Print Settings 0.2mm layer height 25% or more infill At least 3 wall loops At least 3 top and bottom layers
My personal twin-stick arcade controller, designed to play classic and modern twin-stick shooter games. A large format printer with a build surface of at least 400mm length is required. See this page on my blog for model details:…
YoRHa Arcade Stick Cover! I made this to personalize my own arcade stick. It's based off a model from user ChiralPrinting101 (originally a coaster). The .3mf file provided contains the original coaster (sized down to fit), and a central…
This is a drill guide for the keying posts found on the underside of 60mm arcade buttons. The drill tolerances are deliberately loose to give leeway for drilling error and/or variable manufacturing tolerances. The model assumes 37mm…
It is a holder that looks like an arcade cabinet, it allows you to put your game cartage in the back and also a pro controller, with a hole in it to let you charge it while you play it, Where the switch sits the back is open with air…
This mount was design for a 1Up wall-mounted arcade game, but could be used for anything that fits the groove provided. It has provisions for one #10 fastener if left unscaled. Two versions are attached. The STLs are for a low profile…
Arcade For Switch Mk1 and Oled With Buttons Board /!\ The plate 4 is for the non Oled version /!\ Print on place , 15% infill , no supports required. Add with Board Buttons Please clean your Bed thoroughly and check that it fits properly.…
30 millimeter arcade button for cherry mx style mechanical keyboard switches
A recreation of the 1971 arcade game "Computer Space" coin return. The attached photo shows the original part that was used as template for the 3d-model.
These cute critters are fun and bouncy. Print the set! Also included are a set of Filament Clips, just add to some filament, pop 'em inside, add tealights and make them dance! Or make a nice hanging mobile with them. Printing These are…
This is a modified version of the rodsgear's arcade button caps specifically meant to fit the Kailh Choc v1 mechanical switch. I tested a variety of different buttons before settling on remixing rodsgear's button. Buttons with included…
This is a case for the Midway Vegas series of arcade systems (ex: Gauntlet Legends, Gauntlet Dark Legacy, NFL Blitz 2000 Gold, NBA Showtime, etc) that allows you to run the PCB without the original mounting board from the arcade cabinet,…
I think it’s one of my biggest projects, I was thinking about having an arcade game, and I decided to build it from scratch. It took me quite a while, but I learned a lot from the forums on the internet. But I still have a lot of things…
Made for the Loyal Moses Christmas Print Drive 2024 Can print in single color or multi- color (For those who do not know how to color the buttons or screen in Bambu Studio, click the paint button at the top of the app, just under the…
Intro I designed a replacement coin chute for my friend's Ms. Pac-Man cocktail able, since this part can be hard to find and only seems to be available in used condition or NOS. Comparable products can be found here: Action Pinball - U812…
Support to attach an input module with EMI filter on my arcade terminal.
I have a drawer on my arcade and I was looking for a solution to add a button
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Not quite done with the Multi-Layered Joysticks yet, here is The Multi-Layered Arcade Joystick - Black Gold edition with a choice of 10 or 8 button layouts. The buttons and joystick included with this design can also be found as part of…
pokie Arcade control panel broken up in 4 parts no supports needed, printed on a flashforge 5m pro 18hrs each with an easy screw together design. using zippy joysticks and suzo happ buttons. 30% infill. this fits all aristocrat mk5 - mk7.…
Decided to try and model the arcade gun from Terminator Salvation/ Aliens. I am still working on it and have included the STEP files and Shapr3D files. Feel Free to download and edit the files. I still need to add more ribs and the…
I have two switches on my arcade terminal, one for variable power and another for the power of my Seg Naomi
This is a model i made a while ago, one of my first 3D models. It's an arcade machine in which some balls fall and you have to catch them with a sliding spoon. I got inspired by the “Sammy Pokémon Catch Arcade”, i thought it was really…
Updated version 2 included room for heated inserts, updated the clearing for the joystick. 8x 28mm buttons and 2x 25mm
A while back I was asked to design some arcade parts around the use of these tiny micro switches (12.8x6.5mm) which are typically found in mouse buttons. So behold! My first release is the three arcade push button sizes I use the most…
2 caps for the Sanwa 8YT joystick lever The cap is used to not see the screws that connect the joystick to the dashboard. The STL file is simple while the STEP file has the Commodore logo, possibility of printing it with different colors
I have been wanting to hang all of my Arcade belts so I created a simple mockup of the clip end so the belt can be attached and they can hang on the wall.
Using a raspberry pi and some arcade controlling items you can have your own desktop arcade controller. I got the buttons and joystick here: https://www.amazon.com.au/dp/B07H7GF337?ref_=mr_referred_us_au_nz&th=1 and they worked very well…
A simple model that can become a multi-color print on any 3D printer by executing a filament hot swap mid print. Just put a pause at the transition layer in your slicer settings, change out your filament when the pause in effect, and then…
Firstly, Version 3 is still the best balanced option for your control panel and uses standard arcade micro switches. Version 4 Slimline also uses the standard arcade switches but has a lot looser feel (big deadzone) and would be great as…
I recently purchased a DDR arcade cabinet that had two non-DDR spotlights that were missing bulbs of an unknown type. The manual calls for 12v 20-35w bulbs and I liked the feel of incandescent bulbs, hence designing these brackets that…
I recently purchased a DDR arcade machine that was converted for Stepmania. It was missing some of the coin mechanisms, so I decided to design some covers. It was also missing the wiring hose that connect the pads to the cabinet, so I…
Desktop Arcade Basketball is my latest entry in the Desktop Arcade series! See how many hoops you can sink as quick as you can! Challenge your friends, or go for the high score, all from your kitchen table! Desktop Arcade Basketball is…
This design and print was created by two high school students at East Canton. We could only create a prototype due to being on a two week break for Christmas. It is not perfect but we hope these files and image can be improved on to help…
The original design was perfect. It was missing one small touch, the NBA logo, so I added this and made it easily compatible for those using an AMS or MMU. If you're doing multicolor printing all of the colors will be painted on for you!…
Two versions, one multicolor single extruder (multi part) or a single print in place with supports. Included the Street Fighter 2 images I used. I used glue stick to attach printed images, super glue for the buttons, colored coin slots,…
clip to replace broken one on my arcade belt. they no longer make this style and have no replacement parts available. print with supports enabled.
Mechanical Arcade Button supporting standard cherry and Kailh Box switches
Print in PLA 30 % infill For smooother top surface can use ironing
I have been a fan of collecting the Tiny Arcades from Super Impulse since 2018. They are a fun little novelty for retro arcade game fans. For this project you are going to need the following: 2- A soldering station is highly recommended.…
Replace the original keycap and convert your Keychron K3 into a hitbox for fighting games.
I don't own a table to set drinks on but I have an 1UP arcade! This is a simple cupholder to allow drinks such as soda cans and Yeti containers to be used while you play mess free! It slides on with no screws. its's made to be a little…
30mm buttons for the top, 24mm for the side Top buttons are a tight fit and the holes will probably need some slight sanding m4 hardware is used, the brackets use heat inserts https://a.co/d/d0C8mpn the board is mounted with generic…
