Counting matching models…
What is it? Enclosure for 30mm Arcade Button with LED . They are sold by adafruit or digikey. But I think you can find them in other places too. Why make it? Initial idea was just a secret santa gift but then I made multiples of these for…
Print approx. €2.76–€3.38 excl. taxPreliminary estimate for one variant
I had a hard time removing removing SANWA-OBSF-30 without damaging the tabs by hand. So I modeled this tool to assist in extraction. Consists of a cylinder to press the tabs inward and a plunger to push the button out Should also work for…
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
This is a tool to help remove 24mm Japanese pushbuttons, like Sanwa OBSF-24 Should also work with other Japanese 24mm buttons, Including OBSJ and OBSC
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for one variant
This is a handle for a school project where you make a hydraulic marble maze. I made a handle for it but it looks like it can be used for anything so do as you please and use it or modify it to whatever you need it to fit
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
Desktop Arcade Basketball is my latest entry in the Desktop Arcade series! See how many hoops you can sink as quick as you can! Challenge your friends, or go for the high score, all from your kitchen table! Desktop Arcade Basketball is…
Tested in PLA @ 0.2mm layer height. No supports. Print upright as is. Works without any processing but processing is needed if good sound is desired.
This is a 24mm arcade button housing, nut, and cap using a cherry MX Switch. The tolerances are a bit tight on the threads, 0.1mm layer height is a requirement, and the STL was mostly adjusted for my own 3D printer. You may have to play…
These are based on upperpeninsulaplastics's Ultimate Retropie Joystick Controller . Thanks for providing a .step file! These are the changes to my design: Tabbed holes that work for snap-in buttons All other buttons to front Moved…
Its an custom Arcade Controller Box for Sanwa Joysticks and Sanwa Buttons. Ideal for Street Fighter and Retro Gaming
This is a conversion kit for Sanwa 30 sized button to 24 sized buttons. I originally used these for testing out hitbox design when I didn't own any 24 sized buttons, but had bunch of 30 sized buttons laying around. Now I used them for…
Print all three parts. You might have to scale the nut by 1-2% / tweak print settings in order to get a good fit. I've been printing with 0.15mm layer height, but others will probably work.
I included a .step file if anybody would like to edit or customize this file
32mm wrench for arcade button nylon nuts. Works on Happ and happ clone buttons. Not sure about other ones but I don't have other ones. Print instructions Category: Video Games Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Yes…
# 3D Printable Open Stick Modular - Mini (OSM-Mini) --- ## Attribution The following text must be included in any distribution of derivatives of this board. All links must also be included. Copyright 2024…
This is the splitbox, a fighting game controller designed with ergonomics and portability in mind! ERGONOMICS The angles of the top pieces and the buttons are intended to let you keep your hands, wrists, and arms in safer positions and…
How to print Cabinet All the parts can be printed as easy as possible (the suggestion from your slicer should be alright). D-pad and A B buttons parts Print the buttons normally, the bridge is 6mm, see if your printer can handle it, I…
This is a conversion kit for Sanwa 24 sized button to 30 sized buttons. The 30 sized triggers will fit right into these. Just make sure the extrusion multiplier for your filament is on point! (0.45 mm wall thickness on test prints). Use…
Everything you need to 3D print your Arcade joystick... Except for one thing - 4x Micro switches (~28x16mm) per joystick. Obviously, the higher the infill and stronger the material you use will help with their durability, I print with PLA…
Instructions This conversion only works for rocker switches. New rockers with plenty of spring action work best. If you have toggle switches, you will need to change them out. Box Assembly Place all of your rings into the lid and set face…
Simple arcade button that houses a mouse microswitch
Here we have an approximate ¼ scale Arcade Cabinet powered by Raspberry Pi 3B+ or 4B. This model will give you all the components to build your own. This is a remix of the one by Crashlander which is a fantastic design. I have added…
These cute critters are fun and bouncy. Print the set! Also included are a set of Filament Clips, just add to some filament, pop 'em inside, add tealights and make them dance! Or make a nice hanging mobile with them. Printing These are…
A real working coin slot acceptor for arcade system. See it in action https://youtu.be/mNL8CiKHAhU You only need: -Glue -Momentary Button like this https://www.melopero.com/shop/componenti/prototipazione/momentarybuttonpanelmountred/…
This is my version of the Happ style Arcade Button. I needed to replace a few on my machine and didn't wat to buy one so I got out the tools and created my own.
You can use this for plugging spare 24mm holes in your arcade stick. If you're interested or would like to slightly tweak the model, here is a link to the source code .
Minimal symmetrical box for 30mm arcade buttons, specifically the Swerry Button for Cherry mechanical keyboard switches , but theoretically should work with any 30mm arcade buttons; just check the total depth. The photo of the black print…
Print 2 x sidepanel, 1 x sign and 1 x cabinet
This is a set of replacement plungers for Baolian 30mm arcade buttons sold at Microcenter. The labels are embossed so they can be filled in with model paint. Acrylic also works well and is easier to clean mistakes, but is less durable. I…
**CHAMELEON v2.0 update now available here ! Introduction I made this fightstick enclosure a long time ago while prototyping. Most 3d-printed fightstick enclosures are printed horizontally and lead to sharper edges that come into contact…
Thanks for checking out my Arcade Wall Cabinet build! This is a cool one, with a lot of parts and fun design choices for you to make. You can put as much time and effort into it as you want. Sand until you hands bleed and use decals and…
Also a remix of https://github.com/levpopov/LPX/. Supports choc v1 switches. Print the keycaps on the bevelled edge like so, with supports touching the build plate and 0.1mm-0.15mm layer height. Orient the cap so that you print fan is…
This is a wrench used to secure buttons to control panels on arcade games. Untested. Category: Hand Tools
30 millimeter arcade button for cherry mx style mechanical keyboard switches
A remix of Candice's Vertical stand, adding more support, fillets, and a logo. I sometimes like to play my steam deck with a controller lying in bed, with the deck propped up vertically on my nightstand. This is the perfect stand for such…
WARNING! : Any surface imperfections given by your printer on the under side of the stick mount may cause scratches to your controller stick! Compatibility The arcade stick fits snuggly for X-Box One and X-Box Series X controllers.…
Update : STL version now available :) - - - This took me longer and more attempts than I would like to admit, in the end I went for simplicity and it worked out. With a 28mm sized hole in you control panel, you can fill it with this push…
Inspired by Maker's Muse's Macro Keyboard: https://www.youtube.com/watch?v=MeYuIWGqquE A simple 3x3 arcade button panel for use as a macro controller, stream deck, or any other key-related needs. Design is held together with 6x2mm magnets…
I accidently ordered 24mm buttons instead of 30mm ones for this joystick: https://www.thingiverse.com/thing:918504 There's already a solution to this: https://www.thingiverse.com/thing:2807765 However, I decided to keep the print and…
TunyPAD - Stickless Arcade Pad & MIDI Controller Take your DJing, gaming, and music production to the next level with this DIY stickless Arcade Pad & MIDI Controller ! This pad measures 210mm x 100mm. Designed for portability and…
This is my door bell using this very Kailh Choc Arcade Button. Model for the door bell coming soon! Inspired by isycat's model , I set out to create one for the Kailh Choc (v1) keyswitch because it allows for a more low-profile button. At…
General Info Our son (1 year old) loves to click and press tactile things, so this box was made to house an arcade button and simply increment a counter every time it is pressed. The total count is stored in EEPROM for data persistence…
This is an enclosure that houses a D1 Mini style microcontroller and a 30mm Sanwa-style arcade button. You can then use ESPHome to create and flash the firmware for the microcontroller. I've included a sample YAML configuration file…
Mechanical Arcade Button supporting standard cherry and Kailh Box switches
I had a bunch of Alps switches and needed arcade buttons. Category: Video Games
Please allow me to present: The 3D Printed Arcade Push Button Monster Collection! The button widths (diameters) are 18, 24, 30, 36, 42, 48 & 60mm The control panel or 3DP box material thicknesses catered for are 4, 6, 8, 12, 15, 18 & 22mm…
Arcade pushbuttons normally use standard miniature snap action microswitches to provide momentary input to an electrical device. When latching push-on/push-off switch functionality is desired, use this adapter to install a low-cost…
I've had this old arcade joystick/button set in a box made out of scrap wood for a while. I didn't really like it, but couldn't find a model I really liked to print, so I decided to make my own. It's working great with my RetroPie setup.…
A Din Rail mount for four 30mm arcade buttons. You will need to print two tabs for this design. They can be found at: https://www.thingiverse.com/thing:3401942 or https://www.prusaprinters.org/prints/8512-din-rail-mounting-tab The four…
I love N scale trains and the scenery that goes with it. If you use the scaling tools within your slicing software, this could easily become HO or OO scale to meet your specific needs. N Scale Arcade cabinet. PRINT ON A RAFT!!!
Sturdy enclosure for a 100mm arcade button, useful for arcade games, quiz night buzzers, etc. Designed to be strong and survive heavy use. Can sit flat on a table, or mounted if needed (we chose to mount to a tripod during events). Also…
I made a replacement top for a Sanwa button as part of a fight stick project.
Arcade Button for my "Trashcade" Project. The OpenSCAD file is parametric and offers a lot of parameters: It has a dependency to https://github.com/adrianschlatter/threadlib
Updated version 2 included room for heated inserts, updated the clearing for the joystick. 8x 28mm buttons and 2x 25mm
The thin red piece in the picture goes behind the arcade machine as a door, it should slide right in. the arrow is meant to face outwards USE .STEP FILE FOR SLICING OR .STL FILE FOR BAMBU STUDIO
Update 21/02/26: Apologies this one slipped through the net. This should of been an STL version waaay before now. in anycase there is now all 14 of the joysticktop set 2 variations that were previously locked behind my Patreon. ... Here…
WARNING this is a hobbyist project that was originally just for me but I made it Public Domain. Your printer has to have tolerances of around 0.3mm for it to work well but you can widen it if need be. Instructions on GitHub…
Space invaders videogames arcade
Using a raspberry pi and some arcade controlling items you can have your own desktop arcade controller. I got the buttons and joystick here: https://www.amazon.com.au/dp/B07H7GF337?ref_=mr_referred_us_au_nz&th=1 and they worked very well…
Chase for desk clock space invaders arcade Maschine has to scaled by 10 to fit to the other parts.
A Din Rail mount for four cherry mx style buttons using an Adafruit NeoKey 1x4 QT I2C breakout boards and four 30mm arcade buttons using an Adafruit button controller. You will need to print two tabs for this design. They can be found at:…
666I love N scale trains and the scenery that goes with it. If you use the scaling tools within your slicing software, this could easily become HO or OO scale to meet your specific needs. N Scale Arcade cabinet. PRINT ON A RAFT!!!
Low Poly Dance Arcade Machine
In the folder “Dual color 3mf files”, there are 3MF files saved with dual-color print settings The model of the yellow inscription is slightly smaller to fit in case of inaccurate printing. I couldn't fine-tune the correct hole diameter,…
I use this Coin Operator in my Emulation Gaming setups to select the games. But it's also a great fidget toy since the spring mechanism is quite satisfying. The front and the bolt need some support. Otherwise easy to print. The bolt…
Replace the original keycap and convert your Keychron K3 into a hitbox for fighting games.
Though it's a good solution I am not a fan of the modular plugs, so here are some premade options for the side button panels.
Plates that can be added to a cardboard Makecode Arcade cabinet to support the addition of audio jacks for switch access
Cover for an arcade joystick, shouldn't need any supports
A Coin Tray for my "Trashcade" Project
I think it’s one of my biggest projects, I was thinking about having an arcade game, and I decided to build it from scratch. It took me quite a while, but I learned a lot from the forums on the internet. But I still have a lot of things…
🎮 MakeCode Arcade RP2040 Game Console Project If you’re dreaming of building your own retro-style handheld console without burning a hole in your wallet— congrats , you've stumbled upon the right micro-powered rabbit hole. This little…
Arcade For Switch Mk1 and Oled With Buttons Board /!\ The plate 4 is for the non Oled version /!\ Print on place , 15% infill , no supports required. Add with Board Buttons Please clean your Bed thoroughly and check that it fits properly.…
I have a drawer on my arcade and I was looking for a solution to add a button
Print in PLA 30 % infill For smooother top surface can use ironing
No supports and No glue - post fits snug in base. Disclaimer: Fish not guaranteed to understand the game... but you can patiently watch for the thrilling moment they might score some points! :) A few different options available: Ring…
Heres a Galagino arcade cabinet I created using a Cheap Yellow Display. Build information, links, gerbers etc: https://www.hackster.io/dynamight/cyd-galagino-arcade-cabinet-369ce9
My family was given a well used Pandora Box arcade system, but it was missing the joysticks. Not wanting to order a new joystick unit, I snagged a pair of 6mm hex bolts from the hardware store, 60mm long and drew up this simple setup in…
🎮 MakeCode Arcade RP2040 Game Console Project If you’re dreaming of building your own retro-style handheld console without burning a hole in your wallet— congrats , you've stumbled upon the right micro-powered rabbit hole. This little…
The smaller USB Zero Delay Encoder variant.
Updates 2026-03-29 added a 20.5mm version. This version also has a slightly thinner outer ring (1.0mm vs 1.2mm) 2024-03-17 Added different options for leg thickness. Also realized that most problems with legs fitting are solved with…
link to the switch itself: https://www.amazon.com.be/-/nl/dp/B01N549IDL?ref=ppx_yo2ov_dt_b_fed_asin_title Printed with 0,2mm layers and 0,4mm nozzle.
This model is for building a fully functional arcade machine powered by a Raspberry Pi. The build is meant to house a 7inch display and includes mounting holes for a joystick and 8 buttons. While there are tons of cheap handhelds out…
This is my door bell using this very Kailh Choc Arcade Button. Model for the door bell coming soon! Inspired by isycat's model , I set out to create one for the Kailh Choc (v1) keyswitch because it allows for a more low-profile button. At…
A quick restrictor gate I cooked up for my Zippyy stick for Street Fighter V. It's a pretty quick print and mounts using the original screws and holes. Not the shortest throw, but to me it feels much better than the square gate it comes…
This file is a replacement for the Quest VR controller cradle on the X-Arcade Tankstick-VR/Arcade2TV-XR controller. I purchased straps for my controllers and the loop it adds to the bottom prevents the controllers from fitting fully into…
Figurine 3D d’un gorille iconique au style arcade rétro. Modèle détaillé, posture puissante, idéal pour impression 3D et collection. Fichiers STL et 3MF inclus, prêts à imprimer.
If you aren't using a Quest with your X-Arcade Arcade2TV-XR or you added the haptics and want a nice flat shelf, print a couple of these and get a nice flat surface. Note that putting it low like I show in my photo will interfere with the…
This figit-toy is my first attempt at any kind of print in place mechanism, I really like how it moves and makes for a very fun toy. It is nice and small so will not need very much filament to print, could be a great gift if you just need…
Here are some shelf brackets for the X-Arcade Arcade2TV-XR pedestal. The brackets for the top shelf replace the rubber covers and are specifically for anyone who upgraded to the Haptics kit and has an extra top from that. The side…
Welcome to CHAMv3 Split Edition! I am extremely humbled by the amount of people who have downloaded CHAMv3 and posted their makes! I owe any success to you all, and I hope the CHAMELEON project makes custom arcade sticks more accessible…
Flydigi Apex 4 Controller Stand (No Supports, Optimized for 3D Printing) This is a custom-designed stand made specifically for the Flydigi Apex 4 controller. The geometry was carefully measured and modeled to ensure a precise and stable…
This is an arcade-style button that works with a limit switch. The button is fully functional as is, but I added some holes in case you'd like to add lights inside. I recommend gluing it with super glue, since with the type of printer I…
In order to get sound from a Frogger arcade board you need a 200 ohm variable resistor connected to the board. usually in a cabinet this is wired to the front in the coin box. if you're like me and have a board that was removed from a…
The touch panel on the X-Arcade Tankstick-VR/Arcade2TV-XR is really easy to hit by accident. You can reach for something past it (like the controls of the haptics kit) and press buttons just by brushing your arm against it. If you use it…
