Arcade Joystick Tops Release Two
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is my second set of replacement arcade joystick tops (and skirt) that I have designed to work with your standard…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 34
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Update 21/02/26: Apologies this one slipped through the net. This should of been an STL version waaay before now.
in anycase there is now all 14 of the joysticktop set 2 variations that were previously locked behind my Patreon.
...
Here is my second set of replacement arcade joystick tops (and skirt) that I have designed to work with your standard Sanwa type joystick, that have a screw thread.
They are push on to fit and don't require screwing.
This set has more of an emphasis on BIG.
JST_BIGball (71x71 vs 35x35), JST_BIGdome being like the previous but cut into half and JST_capsule being like two normal ball tops stacked up. Also included is the biggest wave skirt which is a disc replacement but with more... flare.
I have tested them with a variety of different Sanwa clones and the fit varies but only a little, a first time fitting can be a little fiddly but they also don't come off easy so I see that as a good thing. Mind you don't trap your fingers between the top and your control board when the blighter suddenly drops on.
PATREON & PATREON SHOP.
https://www.patreon.com/3DFreeman
Thanks for checking out my designs.