Frogger Arcade Volume Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.78 – €0.95 net (excluding VAT)
For file: Frogger Volume Holder - final_0.4n_0.2mm_PLA_MINI_51m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.87 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 51.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Potentiometer mount for a Frogger arcade board.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial
In order to get sound from a Frogger arcade board you need a 200 ohm variable resistor connected to the board. usually in a cabinet this is wired to the front in the coin box. if you're like me and have a board that was removed from a cabinet you probably don't have that connection.
I found the correct POT (https://www.amazon.com/dp/B0D6WHWSNJ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) and was able to get the sound working again. No project is complete without something being 3d printed, so I designed this mount to keep the pot from bouncing around. I used two M3 nuts and bolts to hold it together. glue would work great also if you don't plan on removing it.
I know I had a hard time finding the correct wiring so here it is:
PCB pins are counted from 1 to 6. Pin 1 is in the middle of the board, pin 6 is the outer edge. the POT numbering etched on the bottom of the part I linked above.
POT 3 to PCB pin 2
POT 2 to PCB pin 4
POT 1 to PCB pin 6