Frogger Arcade Volume Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Potentiometer mount for a Frogger arcade board.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
In order to get sound from a Frogger arcade board you need a 200 ohm variable resistor connected to the board. usually in a cabinet this is wired to the front in the coin box. if you're like me and have a board that was removed from a cabinet you probably don't have that connection.
I found the correct POT (https://www.amazon.com/dp/B0D6WHWSNJ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1) and was able to get the sound working again. No project is complete without something being 3d printed, so I designed this mount to keep the pot from bouncing around. I used two M3 nuts and bolts to hold it together. glue would work great also if you don't plan on removing it.
I know I had a hard time finding the correct wiring so here it is:
PCB pins are counted from 1 to 6. Pin 1 is in the middle of the board, pin 6 is the outer edge. the POT numbering etched on the bottom of the part I linked above.
POT 3 to PCB pin 2
POT 2 to PCB pin 4
POT 1 to PCB pin 6