Arcade game button/buzzer enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Sturdy enclosure for a 100mm arcade button, useful for arcade games, quiz night buzzers, etc.
Designed to be strong and survive heavy use. Can sit flat on a table, or mounted if needed (we chose to mount to a tripod during events).
Also designed so that the button bezel is flush with the lid, instead of being raised above it by 17.5mm. The lower piece is flipped upside down and used inside the box to secure the button in place, all the button hardware is used.
Suits 100mm buttons such as this: https://www.adafruit.com/product/1185
(NOTE: I disassembled mine and painted the bezel silver).
Includes rear 6mm hole for wiring/cabling.
Lid attaches using M4 bolts (the washers in the photo are purely decorative, to add to the “industrial” theme I was going for).