Arcade Button caps for MX and kailh low profile keyboard switches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some 24 and 30mm button caps for both MX and Kailh Choc low profile switches.
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 371
- Wydruki
- 1
- Wyświetlenia
- 5258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Some 24 and 30mm button caps for both MX and Kailh Choc low profile switches.
The rings are optional providing a more conventional look but also some extra "guide"for the buttons.
The other caps are for 12x12 push buttons
I strongly recommend to print the small Kailh prongs with PETG filament since is less brittle
You should glue the pieces and I good idea is to melt the joints with the soldering iron tip.
*Updated Oct/2022
Convex and concave options added. If you printing on FDM you must position position upwards with supports.