Under desk hook for maidesite standing desk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A basic double hook that is clipped using the holes which are here to screw the frame together
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 157
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
This hook clip under the desk frame using the two holes on each side of the frame.
There is some space under it to make some cable management as well (useful to pass your power strip cable)
Compatibility
I use the maidesite T2 Pro Plus, but it should probably work with the T2 pro as well!
To make sure of it, measure the frame where the model clip, and it should be close to 138mm.
If you have another desk with similar holes, don't hesitate to remix the model or let me know the dimension and I can publish a modified design.
Printing instruction
I have printed the model using PCTG so you can use PETG. ABS is probably also fine (never printed with it).
I've used 4 perimeters, top and bottom layer with an infill of 15%. This makes a model a bit too stiff, so 3 perimeters, top and bottom layer are likely enough.
I would not recommend PLA as it can be quite brittle, and you need to bend the model a bit to clip it!