Anycubic Kossel Linear Plus Filament Spool Mount

I modified my older hanging spool holder designs and adapted them to fit my Anycubic Kossel Linear Plus.

v2.0 - https://www.thingiverse.com/thing:3029252
v2.5 - https://www.thingiverse.com/thing:3029317

Required Components:
1 x 5/16 in.-18 tpi Zinc-Plated Hex Nut (25-Piece per Bag) - (Homedepot) - (https://is.gd/33W8Yd)
1 x 5/16 in. Zinc Nylon Lock Nut (15 per Pack) - (Homedepot) - (https://is.gd/e1HuBL)
1 x 5/16 in. -18 tpi x 6 in. Zinc-Plated Hex Bolt - (Homedepot) - (https://is.gd/gfU2Uu) - Optional
1 x 5/16 in. -18 tpi x 4 in. Zinc-Plated Hex Bolt - (Homedepot) - (https://is.gd/1Ntnnn)
2 x 608ZZ Bearings
2 x M4 - 12mm Hex Head Bolts
2 x M4 T-Nuts

Printed Components Needed:
1 x Anycubic_Kossel_Plus_2020_Spool_Mount.stl
1 x Anycubic_Kossel_Plus_2020_Spool_Cap.stl
1 x Anycubic_Kossel_Plus_2020_Spool_Roller_120mm_4in_Bolt.stl

Optional Parts:
1 x Anycubic_Kossel_Plus_2020_Spool_Cap_Alt.stl (Optional - Smaller)
1 x Anycubic_Kossel_Plus_2020_Spool_Roller_120mm_6in_Bolt.stl (Optional - 6in Bolt)

Supports are needed for the Anycubic_Kossel_Plus_2020_Spool_Roller (Build plate only) . All STLs are print ready oriented.

Print instructions

Printer Brand: Prusa

Rafts: No

Supports: Yes

Resolution: 0.2

Infill: 20-50

Filament: Inland PLA Yellow
Notes:

50% Infill & 3-4 Perimeters for the "Anycubic_Kossel_Plus_2020_Spool_Mount.stl"
Everything else 20% Infil.

Post-Printing

Step 1: Press-fit the 4in or 6in the bolt into the spool mount. (It will be a little tight, it's what you want.)

Step 2: Add the 5/16 hex nut and tighten it down.

Step 3: Press-fit 608zz bearing on both sides of the bearing roller.

Step 4: Assemble the base and roller together. (4in on the right/6in on the left)

Step 5: Press-fit the 5/16 nylon lock nuts in to the end cap of your choice.

Step 6: Added the end cap and tighten so the bearing roller and rotate freely.

Step 7: Mount it & Complete!