Holiday Light Gutter Clip C7 C9 UPDATE - No Supports!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gutter clip to fasten C7 or C9 bulbs to your gutters.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 99
- Wydruki
- 0
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design is inspired by an old gutter clip that is no longer in production, modified to be easier to print.
The original upload of this model recommended strategically placed support enforcers. This updated version requires no supports while being significantly stronger / resistant to breaking along the layer lines.
Print Recommendations:
- I printed these in PETG. ASA or other materials may work provided they are flexible enough and your printer can handle the overhang.
- Speaking of ... this print is one giant overhang. Use as much cooling as possible.
- Slice in the orientation shown. The model should come in at the correct angle.
- 5 Walls
- 40% infill
- - This might sound like a lot, but it adds <2g per clip in exchange for substantially more strength.