Camera (tripod) screw 1/4"-20 Thick
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Standard Camera tripod screw 1/4"-20
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 333
- Wydruki
- 4
- Wyświetlenia
- 809
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a standard camera screw, as included with most tripods.
Due to the tiny dimensions, I recommend printing it using the highest resolution/lowest layer height your printer is capable of. The part in the photo was printed at 0.12 mm using a 0.4 mm nozzle. No supports needed.
Warning: Use only at your own risk. A plastic screw can not replace a metal screw, not even a s an emergency substitute. Use this part only
a) for lightweight cameras (i.e. drone cams, action cams)
b) for applications in which the screw is the predetermined breaking point (like mounting a camera to drones, RC car or airplane models) or
c) for applications in which the camera is not moved anymore after mounting (like a webcam or printer cam).