Camera (tripod) screw 1/4"-20 Thick
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Standard Camera tripod screw 1/4"-20
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 333
- Makes
- 4
- Views
- 809
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a standard camera screw, as included with most tripods.
Due to the tiny dimensions, I recommend printing it using the highest resolution/lowest layer height your printer is capable of. The part in the photo was printed at 0.12 mm using a 0.4 mm nozzle. No supports needed.
Warning: Use only at your own risk. A plastic screw can not replace a metal screw, not even a s an emergency substitute. Use this part only
a) for lightweight cameras (i.e. drone cams, action cams)
b) for applications in which the screw is the predetermined breaking point (like mounting a camera to drones, RC car or airplane models) or
c) for applications in which the camera is not moved anymore after mounting (like a webcam or printer cam).