Hyundai Brake Switch Nut Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small print to hold the nut when replacing the brake switch
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I had a pretty hard time trying to reinstall a brake switch on an ‘06 Hyundai Elantra, since it just pushes through a hole and has a bumper on the other side with no room to get two hands in. Basically having to hold the switch, the pedal, and try threading a nut with one hand. Why they couldn't have used a slot so you could pre-thread the nut, I don't know.
This sits on the bumper pad and creates a small cup to hold the nut centered so when you drop the switch in from the top, you don't have to worry about holding or aligning, just put the switch in and begin finger threading the nut on.
Didn't feel like trying to get a good picture from inside the car, so I made a representation of how it works.