1 / 3

Simple Napkin Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło: Printables
Kategoria: Kitchen
Licencja: BSD License

Szczegóły Wydruki i komentarze Remiksy Kolekcje

This is a simple, no-frills napkin holder intended for square napkins that are around 6" square. It is designed to be printed in vase mode for speed, and the model has been designed to “trick” the slicer into creating a double wall in vase mode.

NOTE: This model is designed to print at 0.32mm layer height! Results at any other layer height are not guaranteed, especially where the base meets the walls.

Print Settings

This should fit on any printer with a print volume of at least 180mm.

You can always print this in normal (non-vase) mode, but here's what I used:

0.4mm Nozzle:

Vase mode
Layer Height: I used 0.32mm
Top Bottom: 0/6
Walls: 1 (n/a)
Infill: 0% (n/a)
No supports

Tagi

napkinholder