Simple Napkin Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple holder for square paper napkins that can be printed in vase mode, with specialized slicer settings.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- BSD License
This is a simple, no-frills napkin holder intended for square napkins that are around 6" square. It is designed to be printed in vase mode for speed, and the model has been designed to “trick” the slicer into creating a double wall in vase mode.
NOTE: This model is designed to print at 0.32mm layer height! Results at any other layer height are not guaranteed, especially where the base meets the walls.
Print Settings
This should fit on any printer with a print volume of at least 180mm.
You can always print this in normal (non-vase) mode, but here's what I used:
0.4mm Nozzle:
- Vase mode
- Layer Height: I used 0.32mm
- Top Bottom: 0/6
- Walls: 1 (n/a)
- Infill: 0% (n/a)
- No supports