1 / 3
64x64 P5 RGB LED Matrix frame and feet with Rasperry Pi standoff mount — zdjęcie 1
1 / 3

64x64 P5 RGB LED Matrix frame and feet with Rasperry Pi standoff mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Frame to support two RGB led matrices and a Raspberry Pi. Optional feet.

Ocena
0 / 5
Polubienia
11
Pobrania
68
Wydruki
0
Wyświetlenia
760
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Share Alike

A frame for two Adafruit 32x64 P5 RGB LED Matrices, controlled by the Adafruit RGB Matrix Hat. Wanted the frame to stand on it's own, so added two feet.

The frame holes are M3 and Raspi standoff holes M2.5. Tolerances are a bit tight, so might need some drilling if you can't make things fit.

The frame won't fit most beds, so just split it and epoxy together. I used CA (super-glue), drying took ages and the bonds don't feel very sturdy.

The display is for a project to have a led display play gifs and memes sent to it via Telegram. Here's the GitHub if you want to take a look.

Tagi