64x64 P5 RGB LED Matrix frame and feet with Rasperry Pi standoff mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Frame to support two RGB led matrices and a Raspberry Pi. Optional feet.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 68
- Makes
- 0
- Views
- 757
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
A frame for two Adafruit 32x64 P5 RGB LED Matrices, controlled by the Adafruit RGB Matrix Hat. Wanted the frame to stand on it's own, so added two feet.
The frame holes are M3 and Raspi standoff holes M2.5. Tolerances are a bit tight, so might need some drilling if you can't make things fit.
The frame won't fit most beds, so just split it and epoxy together. I used CA (super-glue), drying took ages and the bonds don't feel very sturdy.
The display is for a project to have a led display play gifs and memes sent to it via Telegram. Here's the GitHub if you want to take a look.