Parametric HSW for FreeCAD 1.x. Now with stacking support!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric HSW in FreeCAD 1.x for my own needs.
- Ocena
- 4,667 / 5
- Polubienia
- 18
- Pobrania
- 155
- Wydruki
- 2
- Wyświetlenia
- 509
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
HSW parametrized in FreeCAD. Now with stack support for PLA only!
Usage:
- open the freecad file
- in the "Parameters" var set set Horiz to the required value divided by 2 (the base tile is two hexagons so a value of 1 will get you what you see in hsv_param-1x8.3mf)
- in the “Parameters” var set Vert to the required value
- export the model to stl or 3mf and enjoy!
In the pictures the transparent part is the one named “hsv_param-1x2” printed in translucent pla. The white parts are the originals from the author RosatP to test fitting. All seems to fit nice printed with the MK3.9S HF0.4 - 0.25 mm STRUCTURAL.
Update:
Cleaned up and aproper names in the FreeCAD file, now all parameters are found under “Parameters”
I have also added the possibility to create stacks controlled by the “Stacks” and “Stack Gap” parameters. Tested with a gap of 0.25 as per may printing profile, change to 0.2 or whatever layer height you use. Use a sharp knife or blade to separate at the seam.
Update #2:
Stacking works well with PLA I wasn't able to get it to work with PETG it just sticks too well :/
Update #3:
Somehow the FreeCAD source file was mixed up with the old one without stacks. I have solved this and updated the file.
Enjoy!