Parametric HSW for FreeCAD 1.x. Now with stacking support!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric HSW in FreeCAD 1.x for my own needs.
- Rating
- 4.667 / 5
- Likes
- 18
- Downloads
- 155
- Makes
- 2
- Views
- 510
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
HSW parametrized in FreeCAD. Now with stack support for PLA only!
Usage:
- open the freecad file
- in the "Parameters" var set set Horiz to the required value divided by 2 (the base tile is two hexagons so a value of 1 will get you what you see in hsv_param-1x8.3mf)
- in the “Parameters” var set Vert to the required value
- export the model to stl or 3mf and enjoy!
In the pictures the transparent part is the one named “hsv_param-1x2” printed in translucent pla. The white parts are the originals from the author RosatP to test fitting. All seems to fit nice printed with the MK3.9S HF0.4 - 0.25 mm STRUCTURAL.
Update:
Cleaned up and aproper names in the FreeCAD file, now all parameters are found under “Parameters”
I have also added the possibility to create stacks controlled by the “Stacks” and “Stack Gap” parameters. Tested with a gap of 0.25 as per may printing profile, change to 0.2 or whatever layer height you use. Use a sharp knife or blade to separate at the seam.
Update #2:
Stacking works well with PLA I wasn't able to get it to work with PETG it just sticks too well :/
Update #3:
Somehow the FreeCAD source file was mixed up with the old one without stacks. I have solved this and updated the file.
Enjoy!