1 / 2
Prepper's Emergency Drilled Well Bucket (Print In Place) — zdjęcie 1
1 / 2

Prepper's Emergency Drilled Well Bucket (Print In Place)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Device Designed To Draw Water From Drilled Wells

Ocena
0 / 5
Polubienia
7
Pobrania
19
Wydruki
0
Wyświetlenia
255
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

A device designed to aid in drawing water from a drilled well head in emergency situations. The device uses a one way valve to capture water once submerged. It is small enough to be carried in a “Go Bag” and narrow enough it should be able to get by most obstructions in an 8" well (electrical lines, pitless adapters, casings, etc). Each draw will capture ~7oz of water. It can also be used to draw water samples from a well without a working/powered pump.

It is print in place, so no assembly is required. It has holes to attach 4mm paracord (550 cord).

  • Layer height 0.20mm
  • Infill 30% 
  • Perimeters: 4
  • No Supports

Note: Make sure line is SECURELY attached. The bucket has some natural buoyancy - allow the bucket to sink for a minute or two once it hits the water line before drawing.  

Tagi