Prepper's Emergency Drilled Well Bucket (Print In Place)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Device Designed To Draw Water From Drilled Wells
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 26
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
A device designed to aid in drawing water from a drilled well head in emergency situations. The device uses a one way valve to capture water once submerged. It is small enough to be carried in a “Go Bag” and narrow enough it should be able to get by most obstructions in an 8" well (electrical lines, pitless adapters, casings, etc). Each draw will capture ~7oz of water. It can also be used to draw water samples from a well without a working/powered pump.
It is print in place, so no assembly is required. It has holes to attach 4mm paracord (550 cord).
- Layer height 0.20mm
- Infill 30%
- Perimeters: 4
- No Supports
Note: Make sure line is SECURELY attached. The bucket has some natural buoyancy - allow the bucket to sink for a minute or two once it hits the water line before drawing.