Renault Crankshaft Front Oil seal Mandrel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Renault K4M, K7M and derivatives engines do not have a stop for the front crankshaft oil seal (7700273776)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Renault K4M, K7M and derivatives engines do not have a stop for the front crankshaft oil seal (7700273776 is the size of the oil seal 35*47*6 ). This mandrel is made in size from sources on the Internet and personal measurements. Tested in the case. Fitting the oil seal to a depth of 2 mm. Normally 1-2 mm. There were cars in different ways. Designed for a conventional oil seal with a sealing spring. For the Teflon oil seal, use at your own risk. It can be used with a hammer (full model) or cut off half the height in a slicer and press it with a standard crankshaft bolt (a washer in diameter allows).
It is desirable to print ABS, PETG at least 30% filling. I pressed the oil seal with a trial model from PLA with 15% filling. It is advisable to print the position as in the photo. Support is required.