1 / 1
Renault Crankshaft Front Oil seal Mandrel — image 1

Renault Crankshaft Front Oil seal Mandrel

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Renault K4M, K7M and derivatives engines do not have a stop for the front crankshaft oil seal (7700273776)

Rating
0 / 5
Likes
2
Downloads
21
Makes
0
Views
105
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Renault K4M, K7M and derivatives engines do not have a stop for the front crankshaft oil seal (7700273776 is the size of the oil seal 35*47*6 ). This mandrel is made in size from sources on the Internet and personal measurements. Tested in the case. Fitting the oil seal to a depth of 2 mm. Normally 1-2 mm. There were cars in different ways. Designed for a conventional oil seal with a sealing spring. For the Teflon oil seal, use at your own risk. It can be used with a hammer (full model) or cut off half the height in a slicer and press it with a standard crankshaft bolt (a washer in diameter allows).

It is desirable to print ABS, PETG at least 30% filling. I pressed the oil seal with a trial model from PLA with 15% filling. It is advisable to print the position as in the photo. Support is required.