Target practice for toys
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Target practice for toy guns using ESP32 microcontroller and servos.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
Target practice for toy guns using SG90 servos and an ESP32 controller.
The base with roomfor 5 servos fits on a 256x256 build plate. If you need less, use the cut option in your slicer.
I've attached code for this project. By default it will rotate a random servo 90 degrees after a random timehas passed between 1 and 5 seconds, then rotate it back to 0 degrees after a random time between 1 and 5 seconds.
It's for an ESP32C3 Super Mini with 5 servos.
If given WiFi credentials it will connect to the network and run an interface where you can customize the behavior: min and max time for rotating and rotating back, rotation angle, enebled servos.
If it can't connect to a WiFi network, it will start an access point which can be connected to and you can customize the behavior.
I used:
1 x ESP32C3 Super Mini - cheap, has WiFi, can handle the 5 servos, small
5 x SG90 9g servos
10 x M2x10 - secure the target holders to the servo arms
some wiring to power everything
5 Volt power supply