Target practice for toys
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Target practice for toy guns using ESP32 microcontroller and servos.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 31
- Makes
- 0
- Views
- 247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Public Domain
Target practice for toy guns using SG90 servos and an ESP32 controller.
The base with roomfor 5 servos fits on a 256x256 build plate. If you need less, use the cut option in your slicer.
I've attached code for this project. By default it will rotate a random servo 90 degrees after a random timehas passed between 1 and 5 seconds, then rotate it back to 0 degrees after a random time between 1 and 5 seconds.
It's for an ESP32C3 Super Mini with 5 servos.
If given WiFi credentials it will connect to the network and run an interface where you can customize the behavior: min and max time for rotating and rotating back, rotation angle, enebled servos.
If it can't connect to a WiFi network, it will start an access point which can be connected to and you can customize the behavior.
I used:
1 x ESP32C3 Super Mini - cheap, has WiFi, can handle the 5 servos, small
5 x SG90 9g servos
10 x M2x10 - secure the target holders to the servo arms
some wiring to power everything
5 Volt power supply