tp-link LS108G switch bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket intended to adapt the tp-link LS-108G desktop switch for rack mounting
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently purchased a tp-link gigabit switch for use in my home network. The switch itself was designed for desktop use, so I decided I would design a bracket to adapt it for rack mounting.
The bracket model is one piece, which should fit on most models of printer, however splitting the model in half shouldn't impact its ability to hold the switch There are also small ventilation slots incorporated into the design to avoid blocking the switch's side ventilation holes.
The bracket is printed in PLA, 3 perimeters, 3 top and 3 bottom layers and 20% infill. The brackets are designed to be mounted to the bottom of the switch using the existing keyhole mounting solution. The model was printed flat on the bed, so you will need decent bridging abilities, or otherwise add support.
The bracket requires 10 brass inserts (2 on the bottom and 4 on each side), however, you may not need to populate all the brass inserts on each side. I've got 3 screws on each side and it seems sufficient to hold it securely.
Model No: LS108(UN) Ver2.0